Filter
Top Products
SHOW BPORT_LEC CONFIGURATION
2-313
SHOW BPORT_LEC
CONFIGURATION
Use the SHOW BPORT_LEC CONFIGURATION command to display configuration
information for the specified LAN Emulation Client (LEC) including the BUS rate
limit from the DMM.
BPORT is an abbreviation for Bridge Port.
LEC ports are logical ports, all of which overlay one physical ATM/Synchronous
Optical Network (SONET) port.
Format
Example
The following command displays configuration information for the LEC in slot 4,
port 1:
CB5000> show bport_lec 4.1 configuration
Bridge Port LEC Display for Module 6602M-MOD:
BP LEC Mode I/F Status General Info
------ ---- ------- --------------
04.01 ENABLED DISABLED
Configuration Mode: MANUAL
ELAN Name: NONE
ELAN Type: UNSPECIFIED
Maximum Data Frame Size: 1516
LES ATM Address:
39.00.99.99.99.99.ac.00.99.99.99.99.99.99.99.99.99.99.99.99
LECS ATM Address:
39.99.99.99.ac.00.00.00.00.99.99.01.02.03.04.05.06.07.08.00
Aging Time (secs): 300
BUS Rate Limit (packets/secs): 5000
Connection Complete Timer (secs): 4
Control Timeout (secs): 120
Expected ARP Response Time (secs): 1
Flush Timeout (secs): 3
Forward Delay Time (secs): 15
Maximum Retry Count: 2
Maximum Unknown Frame Count: 1
Maximum Unknown Frame Time (secs): 1
Number of ELAN VCCs: 512
Path Switching Delay (secs): 6
VCC Timeout Period(secs): 1200
slot.lec Identifies the slot and LEC for this operation.
slot (1 through 17) is the slot number and
lec is one of up to 64 LAN
Emulation Clients defined as logical ports for the ATM Backbone
SwitchModule. For example, to identify LEC 32 on the ATM Backbone
SwitchModule in slot 4, enter
4.32
show bport_lec
slot.lec
configuration