Filter
Top Products
SET SECURITY_ADVANCED NETWORK MODE
2-245
SET
SECURITY_ADVANCED
NETWORK MODE
Use the SET SECURITY_ADVANCED NETWORK MODE command to enable or
disable security functions on an Ethernet network that has an Ethernet Private
Line Card assigned to it.
The security mode network parameter allows you to disable or enable all
network security functions. When this function is disabled, the Ethernet Private
Line Card does not send security messages to any media module connected to a
secure network. Consequently, if this parameter is disabled, none of the
network parameters function.
Do not enable this network parameter until you have completed configuring the
remaining network parameters. This ensures that your network security
configuration is completed when you enable security on the network.
Format
Example
The following command enables security functions on ethernet_1:
CB5000> set security_advanced network ethernet_1 mode enable
ETHERNET_1 Administrative Mode set to ENABLED.
Related Command
SHOW SECURITY_ADVANCED
ethernet_
1...8
Specifies which Ethernet network to apply this command.
isolated_
1...8
Specifies which isolated network to apply this command.
all
Specifies that this command applies to all Ethernet networks.
enable
Enables security mode.
disable
Disables security mode.
set security_advanced network
enable
ethernet_
1...8
mode
disable
isolated_
1...8
all