Filter
Top Products
2-278
SET VBRIDGE AFT ALL
SET VBRIDGE AFT ALL
Use the SET VBRIDGE AFT ALL command to create filters and add entries to the
address table of a particular SwitchModule virtual bridge.
Format
Example
The following command locks the address table. After you enter this command,
devices moved to a different location cannot transmit on virtual bridge 2:
CB5000> set vbridge 2 aft all all source_check enable
AFT Set Succeeded: Vbridge 2 Address 00-00-0c-01-a2-03
AFT Set Succeeded: Vbridge 2 Address 00-00-0c-04-25-26
AFT Set Succeeded: Vbridge 2 Address 00-00-b5-07-18-a9
AFT Set Succeeded: Vbridge 2 Address 00-00-b5-21-02-53
Related Commands
SET VBRIDGE AFT BRIDGE_PORT
SET VBRIDGE AFT MAC
SHOW VBRIDGE AFT
vbridge The virtual bridge (1 through 240) you want this command to affect.
all
Specifies that the command affects all learned and user-created (mgmt)
addresses in the virtual bridge’s address table.
learn
Specifies that the command affects all addresses learned by the
SwitchModule in the virtual bridge’s address table.
mgmt
Specifies that the command affects all user-created addresses in the
virtual bridge’s address table.
persistence
Specifies the length of time you want an address entry or set of entries to
remain in the virtual bridge’s address table.
age
The address entry ages out of the address table during the next virtual
bridge aging process. This is the default setting for learned address
entries.
noage
The address entry remains in the address table until you reboot the
SwitchModule. The aging process does not affect the entry.
permanent
The address entry remains in the address table permanently, even after
you reboot the SwitchModule.
source_check
Specifies a filter that filters according to packet source MAC address. Use
this option to "lock down" an address or set of addresses to a particular
port.
disable
Disables source checking for the entry or set of entries you specify.
enable
Enables source checking for the entry or set of entries you specify.
set vbridge
vbridge
aft all
all
learn
mgmt
persistence
source_check
age
noage
permanent
disable
enable