Filter
Top Products
SET TERMINAL TERMINAL_TYPE
2-261
SET TERMINAL
TERMINAL_TYPE
Use the SET TERMINAL TERMINAL_TYPE command to define the type of
terminal connected to a serial (Console or Auxiliary) port. The DMM uses the
terminal type when establishing a TELNET session. The terminal type informs the
remote device which control sequences to transmit to the DMM.
Format
Example
The following command sets the Console terminal type to VT200:
CB5000> set terminal console terminal_type
Enter terminal type: vt200
Terminal parameter changed.
Related Command
SHOW TERMINAL
set terminal
terminal_typeconsole
auxiliary
type
console
Selects the Console port as the serial port for this operation.
auxiliary
Selects the Auxiliary port as the serial port for this operation.
type Identifies the type of terminal connected to the serial port. Use
up to 40 characters.
The default factory setting is VT100.