Filter
Top Products
2-286
SET VBRIDGE IGMP_SNOOPING QUERY_INTERVAL
SET VBRIDGE
IGMP_SNOOPING
QUERY_INTERVAL
Use the SET VBRIDGE IGMP_SNOOPING QUERY_INTERVAL command to set the
IGMP Snooping querying interval in seconds for a Vbridge that is acting as a
IGMP Snooping device.
Format
Example
The following command sets the IGMP Snooping router and querier port aging
time on virtual bridge 12 to 350 seconds:
CB5000> set vbridge 12 igmp_snooping query_interval 350
Related Commands
SET VBRIDGE IGMP_SNOOPING MODE
SET VBRIDGE IGMP_SNOOPING GROUP AGE_TIME
SET VBRIDGE IGMP_SNOOPING PORT AGE_TIME
SET VBRIDGE IGMP_SNOOPING QUERY LISTEN_TIME
SET VBRIDGE IGMP_SNOOPING QUERY MODE
SET VBRIDGE IGMP_SNOOPING RESET_TO_DEFAULT
SET VBRIDGE IGMP_SNOOPING ROUTER_PORT
vbridge The assigned virtual bridge number. Values are 1 through 240.
time Group aging time in seconds. The default is 300.
set vbridge
vbridge
igmp_snooping
query_interval
time