Filter
Top Products
SET VBRIDGE STP BRIDGE_FORWARD_ DELAY
2-293
SET VBRIDGE STP
BRIDGE_FORWARD_
DELAY
Use the SET VBRIDGE STP BRIDGE_FORWARD_DELAY command to change the
Spanning Tree Protocol forward delay value on a SwitchModule virtual bridge.
The default forward delay value is 15 seconds.
Refer to the CoreBuilder 5000 SwitchModule User Guide for more information
about Spanning Tree parameters.
Format
Example
The following command configures the virtual bridge 9 forward delay value
to 25:
CB5000> set vbridge 9 stp bridge_forward_delay 25
Bridge Forward Delay for vbridge 9 set to 25 seconds. Setting
saved.
Related Command
SHOW VBRIDGE CONFIGURATION VERBOSE
vbridge The assigned virtual bridge number. Values are 1 through 240.
forward delay Forward delay time in seconds for the specified virtual bridge.
Values are 11 through 30.
set vbridge
vbridge
stp
bridge_forward_delay
forward delay