Filter
Top Products
SHOW ATM TRAFFIC_DESCRIPTOR
2-307
SHOW ATM
TRAFFIC_DESCRIPTOR
Use the SHOW ATM TRAFFIC_DESCRIPTOR command to display the traffic
descriptor for a specific index or to display the entire traffic descriptor table.
Format
Example
The following command displays the entire traffic descriptor table:
CB5000> show atm 4 traffic_descriptor all
Index Descr Type PeakCellRate SustCellRate MaxBurstSize
----- ----- ---- ------------ ------------ ------------
1 ILMI NoClpScr 17661 3533 11
2 SIG NoClpScr 17661 3533 12
3 155M NoClpNoScr 353208 N/A N/A
4 100M NoClpNoScr 235849 N/A N/A
5 50M NoClpNoScr 117925 N/A N/A
6 25M NoClpNoScr 58962 N/A N/A
Refer to the ATM Backbone SwitchModule User Guide for definition of terms
and additional information.
Related Command
SET ATM
slot Identifies the slot for this operation.
slot (1 through 17) is the slot number.
index Specify an index number to display the traffic descriptor for that index.
all
Specify
all
to display the entire traffic descriptor table.
slot
index
all
traffic_descriptor
show atm