Filter
Top Products
SHOW SECURITY ETHERNET_MAP
2-383
SHOW SECURITY
ETHERNET_MAP
Use the SHOW SECURITY ETHERNET_MAP command to display all MAC addresses
within the specified network.
Format
Example
The following command displays the MAC addresses for the specified port 1 in
slot 10:
CB5000> show security ethernet_map network ethernet_1
Network Map for Network Ethernet_1:
MAC Address(s) SLOT PORT
----------------- ---- ----
01-01-01-01-01-01 10 1
08-00-8f-01-02-03 10 1
08-00-8f-02-03-04 10 1
Related Command
SET SECURITY PORT MODE
show security ethernet_map
port
network
mac_address
mac address
ethernet_
1 through
ethernet_
8
slot.subslot
mac_address
Source addresses. The number of MAC addresses does not exceed the
maximum_security_addresses_per_port, which is 8.
mac address The MAC address entry for which you want to display information.
network
Selects the network to display the MAC addresses.
ethernet_
1 through
ethernet_
8
Specifies the specific Ethernet network for which you want to display the
security ethernet map.
port
Identifies the port for this operation.
slot.subslot Selects a module installed in the hub to display all of its port MAC
addresses.
slot (1 through 17) is the location of a module in the hub and subslot is
the port number on the specified module.