Filter
Top Products
2-138
SET MODULE DOT5_GROUP
SET MODULE
DOT5_GROUP
Use the SET MODULE DOT5_GROUP command to enable or disable Token Ring
(dot5) statistics collection as defined in the IEEE 802.5 Token Ring Management
Information Base (MIB). This command applies to the Token Ring Network
Monitor Card (TR-NMC).
Format
Example
The following command enables IEEE 802.5 MIB statistics collection on the
TR-NMC in slot 3.2:
CB5000> set module 3.2 dot5_group enable
Module Group set to ENABLED.
Related Commands
SHOW COUNTER
SHOW MODULE
set module
slot.
2
dot5_group
disable
enable
slot.
2
Selects the TR-NMC on which you want to enable or disable Token Ring
(dot5) statistics collection. Valid values are hub slot 1 through 17,
subslot 2.
Enables or disables Token Ring (dot5) statistics collection for the chosen TR-NMC. Valid
values are:
■
disable
■
enable