Filter
Top Products
2-388
SHOW SECURITY_ADVANCED NETWORK
SHOW
SECURITY_ADVANCED
NETWORK
Use the SHOW SECURITY_ADVANCED NETWORK command to view the
configuration of each security attribute on your network for Ethernet networks
that have been assigned a CoreBuilder 5000 Ethernet Private Line Card.
Refer to the descriptions of each feature in the CoreBuilder 5000 Ethernet Private
Line Card User Guide for more information.
Format
Example
The following command displays security settings for all hub networks:
Related Command
SET SECURITY_ADVANCED
network Displays the security settings for the network you specify. For example, if you
enter ethernet_1, the system displays the configuration for ethernet_1.
The options are:
■
ethernet_1 through ethernet_8
■
isolated_1 through isolated_8
■
all (to display information for all secure networks)
show security_advanced network
network
CB5000> show security_advanced network all
ETHERNET_4 Network Security Configuration
----------------------------------------------------------------------
Securing Module: Slot 01.02 Version a1.00.6
6100D-SEC: Ethernet Security Private LineCard
Operational Mode: ENABLED
Administrative Mode: ENABLED
Autolearning: ENABLED
Eavesdrop Protection: ENABLED
Intruder Detection: Intruder Actions:
Source Address Checking:ENABLED Intruder Reporting: DISABLED
Source Port Checking: DISABLED Intruder Jamming: DISABLED
Intruder Port DisablingDISABLED