Filter
Top Products
SET BPORT_LEC LINK_TRAP
2-79
SET BPORT_LEC
LINK_TRAP
Use the SET BPORT_LEC LINK_TRAP command to enable or disable link traps for
a LAN Emulation Client (LEC) port.
BPORT is an abbreviation for Bridge Port.
LEC ports are logical ports, all of which overlay one physical ATM/Synchronous
Optical Network (SONET) port.
Format
Example
The following command enables link traps for the LEC in slot 4, port 1:
CB5000> set bport_lec 4.1 link_trap enable
Bridge Port 04.01 parameter set.
Related Command
SHOW BPORT_LEC STATUS
slot.lec Identifies the slot and LEC for this operation.
slot (1 through 17) is the slot number and
lec is one of up to 64 LAN
Emulation Clients defined as logical ports for the ATM Backbone
SwitchModule. For example, to identify LEC 32 on the ATM Backbone
SwitchModule in slot 4, enter
4.32
enable
Enables link traps for a LEC port.
disable
Disables link traps for a LEC port.
set bport_lec
slot.lec
enable
disable
link_trap