Filter
Top Products
SET NETWORK TOKEN_RING BCN_RECOVERY
2-167
SET NETWORK
TOKEN_RING
BCN_RECOVERY
Use the SET NETWORK TOKEN_RING BCN_RECOVERY command to enable or
disable beacon recovery. Disable beacon recovery only as a troubleshooting tool
to prevent rings from self-healing before you can isolate the problem or faulty
device.
If beacon recovery is disabled, the Beacon LED does not light when the ring is
beaconing.
Format
Example
The following command disables beacon recovery on backplane network
token_ring_1:
CB5000> set network token_ring token_ring_1 bcn_recovery disable
Beacon Recovery set to DISABLED.
Related Command
SHOW MODULE
set network token_ring bcn_recovery
disable
enable
network
network Identifies the network for this operation:
■
token_ring_1 through token_ring_10
■
isolated slot
■
isolated_1 slot through isolated _11 slot
disable
Disables beacon recovery.
enable
Enables beacon recovery. The factory setting is enable.