Filter
Top Products
SHOW BPORT_LEC LEARP_TABLE
2-315
SHOW BPORT_LEC
LEARP_TABLE
Use the SHOW BPORT_LEC LEARP_TABLE command to display the contents of
the LE-ARP (MAC address to ATM address) mapping cache.
BPORT is an abbreviation for Bridge Port.
LEC ports are logical ports, all of which overlay one physical ATM/Synchronous
Optical Network (SONET) port.
Format
Example
The following command displays the contents of the LE-ARP mapping cache in
slot 4, port 2:
CB5000> show bport_lec 4.2 learp_table all
BP LEC Mode I/F Status General Info
----- ---- ----------- -------------
04.02 ENABLED ENABLED
MAC Address ATM Address
-------- ------------
00-08-00-11-22-33 39.99.99.99.99.99.99.00.00.99.05.06.01.02.03.04.05.06.01
00-08-00-44-55-66 39.99.99.99.99.99.99.00.00.99.05.06.01.02.03.04.05.06.02
show bport_lec
slot.lec
learp_table
slot.port
all
slot.lec Identifies the slot and LEC for this operation.
slot (1 through 17) is the slot number and
lec is one of up to 64 LAN
Emulation Clients defined as logical ports for the ATM Backbone
SwitchModule. For example, to identify LEC 32 on the ATM Backbone
SwitchModule in slot 4, enter
4.32
address MAC address you are configuring using this command. The format for
MAC addresses is nn-nn-nn-nn-nn-nn
The address 00-00-00-00-00-00 is invalid for this command.