Filter
Top Products
2-256
SET TERMINAL HANGUP
SET TERMINAL
HANGUP
Use the SET TERMINAL HANGUP command to set the hangup parameter for the
DMM. The hangup parameter value applies to both the Console and Auxiliary
ports. When hangup is enabled, the DMM automatically disconnects the
modem when you log out.
The default factory setting is disable. If hangup is disabled, the modem is
disconnected either by the terminal timing out or by your manually hanging up
the modem.
If you fail to hang up the modem connection, an unauthorized user may pick
up the last login session.
Format
Example
The following command disables hangup on the Console port:
CB5000> set terminal console hangup disable
Terminal parameter changed.
Related Command
SHOW TERMINAL
set terminal
hangupconsole
auxiliary
disable
enable
console
Selects the Console port as the serial port for this operation.
auxiliary
Selects the Auxiliary port as the serial port for this operation.
disable
Disables hangup for the Console and Auxiliary ports.
The factory setting is disable.
enable
Enables hangup for the Console and Auxiliary ports.