Filter
Top Products
2-402
SHOW TR_SURROGATE REM_ISOLATING
SHOW
TR_SURROGATE
REM_ISOLATING
Use the SHOW TR_SURROGATE REM_ISOLATING command to show REM Isolating
Table information. The REM Isolating Table lists information in the isolating table
for the downstream station of a fault domain.
Format
Example
The following command shows the REM isolating table for the TR-NMC in slot 3.2:
CB5000> show tr_surrogate 3.2 rem_isolating 1
Ring Error Monitor Isolating Error Data for Entry 1, Network
TOKEN_RING_3
--------------------------------------------------------------------
Station Address 10-00-5a-b1-6b-3c
Impending Soft Error Threshold Exceeded FALSE
Excessive Soft Error Threshold Exceeded FALSE
Station Error Weight 3
Station NAUN Address 00-01-68-50-06-2e
Station Physical Location 00000000
Related Command
SET TR_SURROGATE
slot.
2
The slot ID for the module that you selected for the operation. The slot
number can be from 1 through 17. The subslot is always 2.
all
Shows all REM isolating information.
index Shows the indicated entry from the REM Isolating Table.
show tr_surrogate
slot.
2
rem_isolating
index
all
Field Description
Station Address Lists the MAC address of the station associated with the
accumulated error weight.
Impending/Excessive Soft
Error Threshold Exceeded
Indicates whether the station with the isolating MAC address is
in a weight-exceeded (excessive) or pre-weight exceeded
(impending) condition.
Station Error Weight Lists the calculated error weight of this station in the Isolating
Table. The default is zero.
Station NAUN Address Lists the address of the Nearest Active Upstream Neighbor of
the station.
Station Physical Location Gives the physical location of the receiving ring station of the
fault domain.