Filter
Top Products
SERIAL CONTROL MODULE: UART
Force Transmit Character Control register
402 Hardware Reference NS9215
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Force Transmit Character Control register
Address: 9001_102C / 9001_902C / 9002_102C / 9002_902C
Use the Force Transmit Character Control register to override the normal flow of
transmit data.
D05:04 R/W FLOW2 0 Flow control enable
Allows you to define flow characteristics using the
DATA and MASK fields on the Receive Character
Match Control Register 2.
Note: The ENABLE field has no effect on the
flow control logic.
The flow control is defined as shown:
0x Disabled
10 Change the FLOW_STATE field to XON upon
match
11 Change the FLOW_STATE field to XOFF upon
match
D03:02 R/W FLOW1 0 Flow control enable
Allows you to define flow characteristics using the
DATA and MASK fields on the Receive Character
Match Control Register 1.
Note: The ENABLE field has no effect on the
flow control logic.
The flow control is defined as shown:
0x Disabled
10 Change the FLOW_STATE field to XON upon
match
11 Change the FLOW_STATE field to XOFF upon
match
D01:00 R/W FLOW0 0 Flow control enable
Allows you to define flow characteristics using the
DATA and MASK fields on the Receive Character
Match Control Register 0.
Note: The ENABLE field has no effect on the
flow control logic.
The flow control is defined as shown:
0x Disabled
10 Change the FLOW_STATE field to XON upon
match
11 Change the FLOW_STATE field to XOFF upon
match
Bits Access Mnemonic Reset Description