Filter
Top Products
WORKING WITH THE CPU
R9: Cache Lockdown register
98 Hardware Reference NS9215
The invalidate TLB operations invalidate all the unpreserved entries in the
TLB.
The invalidate TLB single entry operations invalidate any TLB entry
corresponding to the modified virtual address given in
Rd, regardless of its
preserved state. See "R10:TLB Lockdown register," beginning on page 101, for
an explanation of how to preserve TLB entries.
Modified virtual
address format
(MVA)
This is the modified virtual address format used for invalid TLB single entry
operations.
Note:
If either small or large pages are used, and these pages contain subpage
access permissions that are different, you must use four invalidate TLB single
entry operations, with the MVA set to each subpage, to invalidate all
information related to that page held in a TLB.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
R9: Cache Lockdown register
Register R9 access the cache lockdown registers. Access this register using CRm = 0.
Cache ways The Cache Lockdown register uses a cache-way-based locking scheme (format C)
that allows you to control each cache way independently.
These registers allow you to control which cache-ways of the four-way cache are
used for the allocation on a linefill. When the registers are defined, subsequent
linefills are placed only in the specified target cache way. This gives you some
control over the cache pollution cause by particular applications, and provides a
traditional lockdown operation for locking critical code into the cache.
A locking bit for each cache way determines whether the normal cache allocation is
allowed to access that cache way (see “Cache Lockdown register L bits” on
page 99). A maximum of three cache ways of the four-way associative cache can be
locked, ensuring that normal cache line replacement is performed.
Note:
If no cache ways have the L bit set to 0, cache way 3 is used for all linefills.
Invalidate set-associative TLB SBZ
MCR p15, 0, Rd, c8, c6, 0
Invalidate single entry MVA
MCR p15, 0, Rd, c8, c6, 1
Operation Data Instruction
31 09
SBZ
Modified virtual address
10