Filter
Top Products
ENWW 4 Faxing 89
Error codes
This table lists the error codes that are identified in the fax activity log.
Value Description
0-15 Connection enablement failure errors
0
1
2
3
4
5
Normal and proper end of connection
Ring detect without successful handshake
Call aborted, from +FKS or <CAN>
No loop current
Ringback detected, no answer (timeout)
Ringback detected, answer without CED
16-31 Call establishment errors
16
17
Unspecified Phase A error
No answer (T3.0 T1 timeout)
32-63 Transmit negotiation errors
32
33
34
35
36
37
38
39
40
Unspecified transmit Phase B error
Remote cannot receive or send
COMREC error in transmit Phase B
COMREC invalid command received
RSPREC error
DCS sent 3 times without response
DIS/DTC received 3 times; DCS not recognized
Failure to transmit at 2400 bits/s or +FMS value
RSPREC invalid response received
64-79 Data transmit errors
64
65
66
67
68
69
70
71
Unspecified transmit Phase C error
Unspecified image format error
Image conversion error
DTE to DCE data underflow
Unrecognized transparent data command
Image error, line length wrong
Image error, page length wrong
Image error, wrong compression code
80-111 Transmit termination errors
80
81
82
83
84
85
86
87
88
Unspecified transmit Phase D error
RSPREC error
No response to MPS repeated 3 times
Invalid response to MPS
No response to EOP repeated 3 times
Invalid response to EOP
No response to EOM repeated 3 times
Invalid response to EOM
Unable to continue after PIN or PIP
112-143 Receive negotiate errors