Filter
Top Products
136 Configure device menu ENWW
PCL submenu
Use this submenu to specify settings for PCL printing.
Note When a value is specified with an ( * ), that value is the factory (default) setting.
WIDE A4 *NO
YES
Use the Wide A4 setting to change the
number of characters that can be printed on a
single line of A4 media.
YES: Up to 80 10-pitch characters can be
printed on one line.
NO: Up to 78 10-pitch characters can be
printed on one line.
PRINT PS ERRORS *OFF
ON
Select ON to print the PS error page when PS
errors occur.
PRINT PDF ERRORS *OFF
ON
Select ON to print the PDF error page when
PDF errors occur.
Item Values Explanation
Item Values Explanation
FORM LENGTH 60 Use this item to set vertical spacing from
5 to 128 lines for default media size. Specify the
value by using the numeric keypad.
ORIENTATION *PORTRAIT
LANDSCAPE
Use this item to select default page orientation.
Note
It is best to set the page orientation from the driver
or software program. (Driver and software settings
override control-panel settings.)
FONT SOURCE INTERNAL
CARD SLOT 1
CARD SLOT 2
CARD SLOT 3
INTERNAL DISK
EIO 1 DISK
EIO 2 DISK
EIO 3 DISK
INTERNAL: Internal fonts.
CARD SLOT X: Fonts that are stored on the
compact flash.
INTERNAL DISK: Non-removable hard disk (not an
EIO).
EIO X DISK: Removable hard disk installed in an
EIO slot.
FONT NUMBER 0-999 The MFP assigns a number to each font and lists it
on the PCL Font List (see “PCL or PS font list” on
page 352). The font number appears in the Font #
column of the printout.
The factory (default) setting is 0.
FONT PITCH 0.44-99.99 Use this item to select a default pitch for a fixed-
spaced font.
The factory (default) setting is 10.00.