Filter
Top Products
ENWW D Setting up the MFP 385
Install the transfer cleaner
1 Make sure that the large, green lever (1) is in the upright
position. Remove the transfer cleaner from its packaging.
Align the guide on the top of the transfer cleaner (2) with the
notch in the MFP.
2 Using the blue handle on the transfer cleaner, firmly insert the
transfer cleaner (3) into the MFP until it clicks to a stop.
Rotate the blue handle (4) up and firmly push it to the right
until it snaps into place.
Note
If the handle does not snap into place, make sure that the transfer
cleaner is pushed all the way in and that it is rotated all the way to
the right.
Install the toner collection bottle
1 Remove the toner collection bottle from its packaging.
2 Slide the toner collection bottle down and snap it into place
against the MFP.
Note
If the bottle does not snap into place, make sure that the blue
transfer cleaner handle and the large, green lever are in the
upright position.
2
1
3
1
4
5
2