Filter
Top Products
ENWW 4 Faxing 65
3 On the Digital Send Settings menu, select Send to Fax.
4 On the Fax Settings screen, make any appropriate changes to the settings and then
click OK.
5 Click the Edit tab to open the Advanced MFP Modem Settings screen for additional
fax settings.
Administrators can configure a single MFP or perform multiple device configurations. Use
the Multiple device mode to configure several MFPs at one time. For information about this
feature, see the HP Web Jetadmin Reference Manual.
HP MFP Digital Sending Software Configuration Utility
Use the following procedure to set analog fax settings for the MFP.
Note This utility also contains all of the necessary settings for the LAN fax functionality.
To set the analog MFP fax settings from the HP MFP Digital Sending
Software Configuration Utility
1 Start the utility to open the main screen.
2 Select the MFP and then touch C
ONFIGURE MFP.
3 Select the Send to Fax tab.
4 To enable the fax capabilities on the MFP, select the Enable Sent to Fax check box.
To access Analog Fax settings, select directly from the mfp’s internal modem from
the Send Faxes... drop-down list. On the Fax Settings screen make any changes to
the settings and then touch O
K.
5 Click the Edit tab to open the Advanced MFP Modem Settings screen and establish
additional fax settings.
You can configure a single MFP or perform multiple device configurations. For more
information about the HP MFP Digital Sending Software Configuration Utility, see the
HP MFP Digital Sending Software User Guide or the HP MFP Digital Sending Software
Support Guide.
Establishing optional fax settings
Use the following procedures when you want to establish fax settings in addition to those
that are required for fax functionality.
Note Depending on the capabilities of and settings that you have established for your fax method,
some of these options might not be available or configurable.