Filter
Top Products
274 Clearing jams ENWW
Jam in the stacker or stapler/stacker
1 If the jam extends into the output bins, slowly and carefully
pull the media straight out of the MFP so that it does not tear.
2 Move the finishing device away from the MFP. To do this,
stand on the left side of the MFP and pull the finishing device
straight toward you.
3 Remove any jammed media from this area.
4 On the stacker, lift the wire on bin 2 of the device, and
carefully pull out any media from this area. If you have a
stapler/stacker, carefully pull out any media that might be
protruding from the accumulator area.
Note
Only the stacker has the wire on bin 2.
Make sure that you have removed all of the sheets of media from
the paper path; more than one sheet of media might be jammed
in the paper path.
5 Locate the green handle in the flipper area and lift the handle.
1
2
4
5