Filter
Top Products
72 Setting the destination bin ENWW
Setting the destination bin
The destination bin setting specifies the MFP output bin to receive the printed fax.
To set the destination bin
1 Press the MENU button.
2 Touch F
AX.
3 Scroll to and touch F
AX RECEIVE.
4 Scroll to and touch F
AX DESTINATION BIN.
5 Scroll to and touch the number of the bin (default=0), and then touch O
K.
Blocking incoming faxes
Use the blocked-fax list setting to block faxes from senders that you specify. Create a list
of phone numbers. When a fax is received from any of those numbers, it is stored in
memory and immediately deleted without being printed.
To create a blocked-fax list
1 Press the MENU button.
2 Touch F
AX.
3 Scroll to and touch F
AX RECEIVE.
4 Scroll to and touch B
LOCKED FAX LIST.
5 Scroll to and touch A
DD BLOCKED NUMBER.
6 Type a number and touch O
K.
7 To add additional numbers, repeat steps 5 and 6.
To remove numbers from the blocked-fax list
1 Press the MENU button.
2 Touch F
AX.
3 Scroll to and touch F
AX RECEIVE.
4 Scroll to and touch B
LOCKED FAX LIST.
5 Scroll to and touch R
EMOVE BLOCKED NUMBER.
6 Scroll through the numbers to highlight one that you want to remove, and then touch
the phone number to remove it. Repeat this step for any numbers that you want to
remove.
7 Touch O
K.