260 Clearing jams ENWW
Jam in tray 2 or tray 3
Follow these directions to clear jams in tray 2 or tray 3.
1 Open the tray until it stops. If you hear the sound of media
tearing, stop and look for the jammed media. Make sure to
check the upper-right side of the cavity behind the tray. To
minimize tearing, remove the jammed media by pulling it to
the left.
2 Remove any other jammed media from this area by pulling
the media to the left. Make sure that you have removed all of
the pieces of torn media.
3 Slide the 2,000-sheet side input tray (tray 4) away from the
MFP.
4 Open the upper right door and the lower right door.
1
2
4
3