Filter
Top Products
142 Configure device menu ENWW
COPY/SEND SETTINGS INACTIVITY TIMEOUT
AUTO SETTINGS RESET
TIMEOUT AFTER SEND
HOLD OFF PRINT JOB
HOLD OFF TIME
SCAN AHEAD
AUTO JOB INTERRUPT
INTERRUPT COPY JOB
AUDIBLE FEEDBACK
INACTIVITY TIMEOUT: The amount of
time that the copy, send, or fax settings
are kept before resetting to the defined
settings. The value range, in seconds, is
10 to 300, and the reset default is 60.
AUTO SETTINGS RESET: This option resets
the copy, send, and fax settings when the
S
TART button is pressed. The values are
OFF and ON, and the default is OFF.
TIMEOUT AFTER SEND: The amount of
time that a send setting is kept before
resetting to the factory (default) settings.
The value range is 10 to 300, and the
default is 10.
HOLD OFF PRINT JOB: If this value is set
to ON, the print jobs will be held while you
are using the MFP control panel.
HOLD OFF TIME: This value controls how
long a print job is held off after the copy/
send job is complete.
SCAN AHEAD: A copy job can be scanned
even if the MFP is printing another job.
The job is scanned and held until it can
be printed. If SCAN AHEAD=OFF, the job will
not be scanned until the print job is
completed.
AUTO JOB INTERRUPT: A copy job can
automatically interrupt any currently
printing network print job in between the
number of full copies printed. When this
item is set to OFF, the copy job waits until
the network print job is completed.
INTERRUPT COPY JOB: Interrupt the
current copy job to make a different
copy. When you press the S
TART button,
the MFP presents a message that asks if
you want to interrupt the current copy
job. When set to OFF, the current copy
job cannot be interrupted by another
copy job.
AUDIBLE FEEDBACK: Gives an audible
indication when a key is pressed or when
you touch an interactive area of the
touch screen.
Item Values Explanation