Filter
Top Products
ENWW 9 Managing and maintaining 223
7 Grasp both sides of the belt, press the blue levers on each
side, and then pull the belt out of the MFP.
8 Remove the new belt from its packaging and save the
packaging. Gently remove the media from around the transfer
belt.
CAUTION
Do not touch the shiny black surface of the new transfer belt.
9 Grasp both sides of the belt and align the blue arrows on the
belt with the blue arrows inside the MFP. Insert the belt
halfway into the MFP.
10 Move one hand to the front-center of the belt, and then slide
the belt completely into the MFP. Close the right door.
Note
If the right door does not close, make sure that the transfer belt is
pushed completely into the MFP.
11 On the front side of the MFP, locate the blue transfer-roller
handle beneath the large green lever. Grasp the handle and
pull the used roller out of the MFP.
12 Unpack the new roller and set it on a clean, flat surface.
Carefully remove the protective sheet.
CAUTION
Do not touch the black foam roller, and be careful not to scratch
the underside of the belt as you insert the roller into the MFP.
8
9
10
11
12
7