Filter
Top Products
14 Printer drivers and software ENWW
To install printer drivers from Mac OS 10.1 and later
1 Connect the network cable between the HP Jetdirect print server and a network port.
2 Insert the CD-ROM into the CD-ROM drive. The CD-ROM menu runs automatically. If
the CD-ROM menu does not run automatically, double-click the CD-ROM icon on the
desktop, and then double-click the Installer icon. This icon is located in the Installer/
<language> folder of the Starter CD-ROM (where <language> is your language
preference). (For example, the Installer/English folder contains the Installer icon for
the English printer software.)
3 Double-click the HP LaserJet Installers folder.
4 Follow the instructions on the computer screen.
5 Double-click the Installer icon for the desired language.
6 On your computer hard drive, double-click Applications, Utilities, and then Print
Center.
7 Click Add Printer.
8 Select the appropriate network selection.
9 Select the printer name.
10 Click Add Printer.
11 Close the Print Center (10.1 and 10.2) or the Printer Setup Utility (10.3) by clicking the
close button in the upper-left corner.
Installing Macintosh printing system software for direct connections
(USB)
Note Macintosh computers do not support parallel port connections.
This section explains how to install the printing system software for Mac OS 8.6, Mac OS
9.x, and Mac OS 10.1 and later.
The Apple LaserWriter driver must be installed to use the PPD files with Mac OS 8.6 to
9.x. Use the Apple LaserWriter 8 driver that came with your Macintosh computer.
To install the printing system software
1 Connect a USB cable between the USB port on the printer and the USB port on the
computer. Use a standard 2-meter USB cable.
2 Close all software programs that are open or running.
3 Insert the printer CD-ROM into the CD-ROM drive and run the installer.
The CD-ROM menu runs automatically. If the CD-ROM menu does not run
automatically, double-click the CD-ROM icon on the desktop, and then double-click
the Installer icon. This icon is located in the Installer/<language> folder of the Starter
CDROM (where <language> is your language preference).
4 Follow the instructions on the computer screen.
5 Restart the computer.