Filter
Top Products
294 Understanding MFP messages ENWW
CLEAN POST CHARGER The post charger requires cleaning. Clean the post charger. See “Cleaning
the post charger” on page 238.
CLEANING DISK FAILED A hard disk or Flash Memory disk
cleaning failed.
Try cleaning the disk again.
CLEARING ACTIVITY LOG The corresponding fax menu item is
activated.
No action is necessary.
CLEARING ALL BLOCKED
NUMBERS
The corresponding fax menu item is
activated.
No action is necessary.
CLEARING EVENT LOG The even log is clear. The MFP control-
panel display will back up one screen to
the service menu when the event log is
clear.
No action is necessary.
CLEARING PAPER The MFP jammed or was turned on and
media is detected in a wrong location.
The MFP is automatically attempting to
eject the pages.
No action is necessary.
CLOSE FLATBED COVER
DURING INITIALIZATION
The ADF is open during initialization. Close the ADF, turn the MFP off, and
then turn it on again.
CLOSE FRONT OR LOWER LEFT
DOOR
TO CONTINUE TURN OFF THEN
ON
The front or lower left door is open. The
MFP cannot start when any doors are
open.
Close the doors and then turn the MFP
on.
CLOSE FRONT OR UPPER
RIGHT DOOR
TO CONTINUE TURN OFF THEN
ON
The front or upper right door is open.
The MFP cannot start when any doors
are open.
Close the doors and then turn the MFP
on.
CLOSE RIGHT DOOR The right door is open. Close the right door to continue printing.
CONDITIONING...
IMAGE DRUM
A new image drum has been installed or
the MFP is exiting Sleep mode.
No action is necessary.
CONDITIONING...
TRANSFER
A new transfer roller has been installed
or the MFP is exiting Sleep mode.
No action is necessary.
CORRUPT FIRMWARE IN
EXTERNAL ACCESSORY
Corrupt firmware is detected in the input
or output accessory.
1 Turn off the MFP, and then turn it
back on.
2 If the message appears, the
firmware might need to be updated.
See “Installing firmware updates” on
page 242.
DATA RECEIVED The MFP is waiting for the command to
print the last page.
Press the S
TART button or the CLEAR
button to clear the print buffer.
DATE/TIME=
YYYY/MMM/DD HH:MM
TO CHANGE TOUCH OK. TO
SKIP TOUCH EXIT.
The MFP is requesting the current date
and time.
Set the current date and time.
Message Description or explanation Recommended action