Filter
Top Products
148 Configure device menu ENWW
Item Options Values Explanation
DEFAULT IP
PRIMARY DNS
SECONDARY DNS
PROXY SERVER
PROXY PORT
AUTO IP
LEGACY
Use this item to specify what you
want the IP address to default to
when the print server is unable to
obtain an IP address from the
network during a forced TCP/IP
reconfiguration.
Use this item to specify the IP
address of the primary DNS server.
Use this item to specify the IP
address of the secondary DNS
server.
Use this item to specify the proxy
server that will be used by
embedded software programs.
Use this item to enter the port
number used by the proxy server for
client support. The port number
identifies the port reserved for proxy
activity on the network. The value
can be from 0 to 65,535.
APPLTALK ENABLE ON
OFF
Use this item to enable or disable the
AppleTalk protocol.
DLC/LLC ENABLE ON
OFF
Use this item to enable or disable the
DLC/LLC protocol.
SECURE WEB HTTPS REQUIRED
HTTPS OPTIONAL
Use this item to specify if the
embedded Web server will accept
communications by using only
HTTPS (secure HTTP) or by using
HTTP and HTTPS.
RESET SECURITY NO
YES
Use this item to specify if the current
security setting on the print server
will be saved or reset to the factory
defaults.
LINK SPEED AUTO
10T HALF
10T FULL
100T HALF
100T FULL
Use this item to select the network
link speed and communication mode
for the print server.