Filter
Top Products
298 Understanding MFP messages ENWW
LOAD TRAY 1
[TYPE] [SIZE]
TO CONTINUE TOUCH OK
The MFP is waiting for media to be
loaded into tray 1.
Touc h OK to continue printing if the
paper that is loaded in the tray is the
correct size and type. If it is the incorrect
size or type, remove the media in the
tray and load the tray with the correct
media.
LOAD TRAY 1
[TYPE] [SIZE]
TO USE ANOTHER TRAY TOUCH
OK
The MFP is waiting for media to be
loaded into tray 1. Media that is loaded
in the tray might not match the size or
type necessary for the specified job.
1 Load the specified media into the
tray.
2 To use another tray, touch O
K, touch
NEXT, and then scroll to the tray that
you want to use.
3 Touch O
K when the size and type
you want appears.
LOAD TRAY XX
[TYPE] [SIZE]
A job has been sent that requires a
specific type or size of media that is not
loaded in the tray, and no other trays are
available to use.
1 Load the specified media into the
tray.
2 When prompted by the control-
panel display, select the media size
and type that you want to use.
To cancel a job, press the S
TOP button.
Note
Touching I
GNORE will temporarily delay
a print job to allow for a copy job.
LOAD TRAY XX
[TYPE] [SIZE]
TO USE ANOTHER TRAY TOUCH
OK
A job has been sent that requires a
specific type or size of media that is not
loaded in the tray, and at least one other
tray is available to use.
1 To use media that is loaded in a
different tray, touch O
K and then
touch NEXT to scroll through the
loaded media sizes and types.
2 When the size and type that you
want appears, touch O
K.
To cancel a job, press the S
TOP button.
Note
Touching I
GNORE will temporarily delay
a print job to allow for a copy job.
LOAD TRAY XX
[TYPE] [SIZE]
MOVE TRAY SWITCH TO
CUSTOM.
TO USE ANOTHER TRAY TOUCH
OK
A job has been sent that requires a
specific type or size of media that is not
loaded in the tray, and at least one other
tray is available to use.
1 To use media that is loaded in a
different tray, touch O
K and then
touch N
EXT to scroll through the
loaded media sizes and types.
2 When the size and type that you
want appears, touch O
K.
3 Load the specified media into the
tray.
4 Move the switch to CUSTOM.
5 When the size and type that you
want appears on the control-panel
display, touch O
K.
To cancel a job, press the S
TOP button.
Note
Touching I
GNORE will temporarily delay
a print job to allow for a copy job.
Message Description or explanation Recommended action