200 Using the MFP memory ENWW
Using the MFP memory
The MFP has two, 200-pin DDR DIMM slots. One slot contains a standard 512 MB DIMM
and the other slot is open. The MFP only recognizes the standard 512 MB DIMM and the
open DIMM slot should remain open because memory expansion is not required. The
MFP will ignore added memory.
The MFP also has three Flash Memory slots. One slot contains a Flash Memory card the
contains the MFP firmware. The two available Flash Memory slots provide expansion
capability for fonts and additional software programs.
For ordering information, see “Information from the MFP” on page 363, or go to
www.hp.com/support/
.