234 Cleaning procedures ENWW
Cleaning procedures
Some print-quality and copy-quality problems can be resolved by cleaning certain MFP
components rather than replacing an MFP part.
Cleaning the ADF
Clean the ADF only if it is visibly marked or dirty, or if you are experiencing a decrease in
copy quality (such as streaking).
To clean the glass
● Clean the glass only if dirt is visible, or if you see poor copy quality (such as streaking).
● Clean the glass surface by wiping it gently with a clean, damp, lint-free cloth. Use an
ammonia-based surface cleaner to dampen the cloth.
CAUTION Do not pour or spray liquids directly onto the glass.
Do not press hard on the glass surface. You might break the glass.