Filter
Top Products
ENWW 1 MFP basics 25
Note
Depending on the size that you selected, the MFP might prompt
you to move the Custom/Standard switch in the tray to another
position. The MFP might also prompt you to move the paper
guides. Follow the instructions on the control panel, close the
tray, and then repeat this procedure starting with step 9.
11 To change the type setting, touch the correct paper type. The
message SETTING SAVED is displayed for a moment, and then
the size and type settings are displayed.
Note
If you are using media that is lighter or heavier than 75 g/m² to
105 g/m² (20 to 28 lb), or if you are using coated media or
transparencies, set the media type for the tray.
12 If the size and type settings are correct, touch E
XIT to accept
the settings. The tray is ready to use.
Note
See “Selecting media for your document” on page 175 for more
information about selecting types of media.