Filter
Top Products
ENWW 2 Copying 41
Copying from the scanner glass
Use the scanner glass to copy small, lightweight (less than 46 g/m² or 12 lb), or irregularly
sized originals, such as receipts, newspaper clippings, photographs, or old or worn
documents. The scanner glass is also used to copy books, magazines, and manuals.
1 Place the document face-down on the scanner glass.
2 Make any image modifications, and choose any copy settings, if necessary. See
“Copying by using user-defined settings” on page 39 for the available settings.
3 If you are making only one copy, press S
TART. If you are making multiple copies, use
the numeric keypad to select the number of copies (up to 999), and then press S
TART
to begin copying.
Copying by using the ADF
Using the ADF, you can make as many as 999 copies of a document that has as many as
100 pages (depending on the thickness of the pages).
1 Load the document face-down into the ADF. The MFP can automatically detect several
standard paper sizes.
2 Make any image modifications, and select any copy settings if necessary. See
“Copying by using user-defined settings” on page 39 for the available settings.
If you are making only one copy, press S
TART. If you are making multiple copies, use the
numeric keypad to specify the required number of copies, and then press S
TART.
Using Job Mode
Use the Job Mode feature to build a single print job from multiple scans. You can use either
the ADF or the scanner glass. The settings for the first scan are used for subsequent
scans.
1 Touch C
OPY.
2 Touch D
ESCRIBE ORIGINAL.
3 Touch A
DVANCED.
4 In the JOB MODE check box, touch O
N.
5 Select any output settings, if necessary.
6 After each page is scanned, the control panel prompts you for more pages.
7 Do one of the following:
• If the job contains more pages, load the next page, and then press the
START button.
• If the job contains no more pages, touch F
INISHED to print.
Note In Job Mode, if you scan the first page of a document by using the ADF, then you must scan
all of the pages in that document by using the ADF. If you scan the first page of a document
by using the flatbed scanner, then you must scan all of the pages in that document by using
the flatbed scanner.