Filter
Top Products
ENWW D Setting up the MFP 389
8 Put the end of the connecting rod into the U-shaped metal
slot on the pedestal (3). Pinch the tabs on each side of the
blue plastic bracket (4), and slide the blue plastic bracket into
the metal slot until it locks into place.
9 Connect the data cable on the 2,000-sheet side input tray
(tray 4) to the data port on the MFP pedestal (5). Connect the
power cord on the 2,000-sheet side input tray (tray 4) to the
power connection on the MFP pedestal (6).
10 Push the 2,000-sheet side input tray (tray 4) toward the MFP.
The two plastic hooks on the 2,000-sheet side input tray
(tray 4) lock into the pedestal.
CAUTION
Remove any obstructions around the 2,000-sheet side input tray
(tray 4) before attaching it to the MFP, and make sure that the two
cables are correctly positioned at the back of the 2,000-sheet side
input tray (tray 4).
11 If a gap exists between the MFP and the 2,000-sheet side
input tray (tray 4), either at the top or at the bottom, adjust the
blue levelers above the 2,000-sheet side input tray (tray 4)
wheels until the gap closes.
9
10
11
8
4
3
5
6