Filter
Top Products
306 Understanding MFP messages ENWW
REPLACE TRANSFER KIT The rollers are slipping but the transfer
kit is at the end of its life.
Replace the transfer kit with a new,
genuine-HP transfer kit. Follow the
instructions that appear on the control-
panel display to tell the MFP that the
transfer kit is new. See “Replacing the
image transfer kit” on page 222.
REPLACE TRANSFER KIT
TO CONTINUE PRESS OK
The Supplies Low menu is set to Stop
and the transfer kit has passed the low
threshold.
Touc h O
K to continue printing, and order
a new transfer kit if necessary.
REPLACE YELLOW CARTRIDGE
TO CONTINUE TOUCH OK
The Supplies Low menu is set to Stop
and the yellow print cartridge has
passed the low threshold.
Touc h O
K to continue printing, and order
a new yellow print cartridge if necessary.
REPLACE YELLOW DRUM
TO CONTINUE TOUCH OK
The Supplies Low menu is set to Stop
and the yellow image drum has passed
the low threshold.
Touc h OK to continue printing, and order
a new yellow image drum if necessary.
RESETTING KIT COUNT The user selected Y
ES in the Reset
Supplies menu to reset the count for
any of the supplies that are not detected
as new.
No action is necessary.
RESTORING FACTORY
SETTINGS
A RESTORE FACTORY SETTINGS reset and
a COLD RESET are being performed.
No action is necessary.
RESTORING... A RESTORE LAST SAVED STATE, RESTORE
PRINT MODES, RESTORE OPTIMIZATION,
RESTORE COLOR VALUES are being
performed.
No action is necessary.
RESTORING...[ACCESSORY #] The external paper accessory data is
being restored.
No action is necessary.
ROM DISK DEVICE FAILURE The ROM disk had a critical failure and
can no longer be used.
Turn the MFP off and then on to clear
the message.
ROM DISK FILE OPERATION
FAILED
The requested operation could not be
performed. You might have attempted
an illegal operation, such as trying to
download a file to a non-existent
directory.
No action is necessary.
ROM DISK FILE SYSTEM IS
FULL
The ROM disk has reached maximum
capacity.
1 Delete files and then try again, or
turn the MFP off and then on to
delete all of the files on the device.
(Delete files by using HP Web
Jetadmin or another software utility.
See the online help for more
information.)
2 If the message persists, increase
the size of the ROM disk and
change the ROM disk size from the
Configuration menu on the control
panel (see “System setup submenu”
on page 140).
ROM DISK IS WRITE
PROTECTED
The ROM disk is protected, and no new
files can be written to it.
Try using a new disk that is not write
protected.
Message Description or explanation Recommended action