Filter
Top Products
70 Setting billing codes ENWW
Setting dial-tone detection
Use the detect dial-tone setting to specify whether the fax checks for a dial tone before
sending a fax.
To turn dial-tone detection on or off
1 Press the MENU button.
2 Touch F
AX.
3 Scroll to and touch F
AX SEND.
4 Scroll to and touch D
ETECT DIAL TONE.
5 Touch O
N (default) to enable dial tone detection, or touch OFF to disable dial tone
detection.
Setting billing codes
When the billing code setting is turned on, you are prompted to type a number when
sending a fax. This number appears on the billing code report. To view the billing code
report, either print the report (see “Printing the billing code report” on page 79) or use a
software program to view it.
To set billing codes
1 Press the MENU button.
2 Touch F
AX.
3 Scroll to and touch F
AX SEND.
4 Scroll to and touch B
ILLING CODE.
5 Touch C
USTOM to open the billing code screen. Scroll to and touch the minimum
number of digits that you want in the billing code, and then touch O
K. To turn off the
billing codes setting, touch O
FF (default).
Setting rings-to-answer
Use the rings-to-answer setting to specify the number of times the phone rings before the
call is answered by the fax.
To set the number of rings-to-answer
1 Press the MENU button.
2 Touch F
AX.
3 Scroll to and touch F
AX RECEIVE.
4 Scroll to and touch R
INGS TO ANSWER.
5 Scroll to and touch the number of rings, and then touch OK.
Note The default setting range for rings-to-answer is specific to the country/region where the
MFP is located.