Filter
Top Products
ENWW D Setting up the MFP 379
Unpacking and setting up the MFP
1 The HP Color LaserJet 9500mfp is shipped in three boxes.
These boxes contain the MFP (1), the finishing device (3,000-
sheet stacker, 3,000-sheet stapler/stacker, multifunction
finisher, or 8-bin mailbox (2), and the 2,000-sheet side input
tray (tray 4) (3).
Note
The MFP box also contains the consumables box.
2 Remove the cellophane (1) that is wrapped around the MFP
box, unlatch the two clips (2) on the side of the cardboard box
that covers the MFP, and lift up and remove the cardboard box
(3) that covers the MFP.
Note
Make sure to save all of the packing material.
3 Remove the three white, plastic locks (4) from the side of the
cardboard box, and then remove the four corner supports (5)
from inside of the cardboard box.
4 Open the two flaps on the side of the cardboard box.
5 Remove the supplies box (6), remove the two unloading
ramps (7), remove the external styrofoam pieces (8), and
remove the plastic bag (9) that covers the MFP.
6 Securely position the unloading ramps (10) as indicated in the
graphic.
Note
The ramps are labeled “L” and “R” to indicate “Left” and “Right”.
2
3
4
5
1
6
1
2
3
2
2
3
4
5
8
7
7
6
8
8
8
9
10