Filter
Top Products
360 Power requirements and circuit capacity ENWW
Power requirements and circuit capacity
Values subject to change, see www.hp.com/go/clj9500mfp for current information.
WARNING! Power requirements are based on the country/region where the MFP is sold. Do not convert
operating voltages. This can damage the MFP and void the product warranty.
Power consumption
CAUTION Power requirements are based on the country/region where the MFP is sold. Do not convert
operating voltages. This might damage the MFP and void the product warranty.
The following table indicates the MFP’s average power consumption in watts¹:
1. Values current as of 7/10/04. Values subject to change.
See www.hp.com/go/clj9500mfp
for current information.
2. Power reported is highest values measured for color and monochrome printing/
copying using all standard voltages.
• Default time from Ready Mode to Sleep 1 = 15 minutes, and to Sleep 2 =
45 minutes.
• Recovery time from Sleep 1 to start of printing = 30 seconds, and from Sleep 2 to
start of printing = 140 seconds.
• Heat dissipation in READY mode = 939 BTU/hour.
When the MFP is off, disconnecting the power cord from the electrical source can prevent
power consumption. Do not disconnect the power cord until the fuser has depressurized.
110-volt models 230-volt models
Power requirements 100 to 127 Volt (+/- 10%)
50 to 60 Hz (+/- 2 Hz)
220 to 240 Volt (+/- 10%)
50 to 60 Hz (+/- 2 Hz)
Rated short-term current 12 Amps 7 Amps
Product model Printing (24 ppm)² Copying (24 ppm)² Ready Low Power
(Sleep 1)
PowerSave
(Sleep 2)
Off
HP Color
LaserJet
9500mfp
820 Watts 910 Watts 275 Watts 125 Watts 55 Watts 1.4 Watts