Filter
Top Products
392 ENWW
Loading media in the 2,000-sheet side input
tray (tray 4)
1 Open the top door, and then open the bottom door.
2 Move the media guide to match the media size being loaded
(1).
Note
The 2,000-sheet side input tray (tray 4) supports Letter, A4, LTR-
R, and A4-R media.
3 Load the media (2) so that the side to be printed on faces up
and the long edge is toward the MFP. Do not load more media
than the maximum that is indicated by the media-fill triangles
(3) at the back of the 2,000-sheet side input tray (tray 4).
Note
Make sure that the corners of the media are not folded.
4 Close the bottom door, and then close the top door.
Using the control panel
1 When the MFP reaches the Ready state, the green Ready
light turns on, the READY message appears on the control-
panel graphical display, and the supplies status indicators
show that all supplies are new.
Note
The READY message might alternate with other messages.
2 To verify that the MFP is operating correctly and that the
accessories are installed correctly, press the M
ENU button,
touch I
NFORMATION, and then touch PRINT CONFIGURATION.
Note
If the page does not print, check the control panel for error
messages and follow the instructions on the graphical display to
clear any errors. See “Interpreting control-panel messages” on
page 292 for troubleshooting information.
2
3
4
1
1
3
2
2
1