ENWW 10 Problem solving 281
Jam in the multifunction finisher
1 Open the multifunction finisher cover.
2 Slowly and carefully pull the jammed media straight out of the
multifunction finisher so that it does not tear.
3 Close the multifunction finisher cover.
4 Move the multifunction finisher away from the MFP. To do this,
push on the arrow at the front right of the multifunction finisher
to unlatch it. Then stand on the left side of the MFP and pull
the multifunction finisher straight toward you.
CAUTION
Do not push the finishing device face-up tray when you are
removing or installing the finishing device.
5 Carefully remove any media from the MFP output area.
1
4
2
3
5