Filter
Top Products
ENWW 5 Printing 95
3 Change any of the settings on the Finishing, Effects, Paper, Output, Basics, Job
Storage, Color, Configure, and NT Forms tabs (the PostScript [PS] driver also
include a PS and Status tab). These settings are now the defaults for the MFP.
4 Click OK to save your settings, and to close the printer driver.
To change default settings in Windows 2000 and Windows XP
1 Click the Start button, point to Settings, and then click Printers (Windows 2000) or
Printers and Faxes (Windows XP).
2 Right-click the HP color LaserJet 9500mfp icon, and then click Printing
Preferences.
3 Change any of the settings on the Advanced, Paper/Quality, Effects, Finishing,
Output, Job Storage, and Color tabs. These settings are now the defaults for the
MFP.
4 Click OK to save your settings, and to close the printer driver.
To change default settings in Macintosh (OS 9.2 to 9.2.X)
1 On the File menu, click Print.
2 Change the settings you want on the various pop-up menus.
3 Click or select Save Settings in the lower left corner.
To change default settings in Macintosh (OS 10.1 and later)
1 On the File menu, click Print.
2 Change the settings you want on the various pop-up menus.
3 Select the Presets pull-down tab and select Save As.