Filter
Top Products
218 Managing supplies ENWW
Replacing the image drums
There are four color image drums: yellow, magenta, cyan, and
black. Use this procedure to install the drums. This example
shows the yellow drum being replaced.
1 Replace the image drum when REPLACE <COLOR> DRUM
appears on the control-panel display.
2 Open the front doors of the MFP and swing the large green
lever down.
Note
Before beginning this procedure, you might want to remove your
jewelry, which can snag on parts inside the MFP.
3 Rotate the blue dial up until it clicks, and the image-drum door
unlatches.
4 Open the door completely.
5 Pull the used drum partially out of the MFP. Grasp the blue
handle on top of the drum, and then remove the drum.
Note
If toner gets on your clothes or your hands, wash them with cold
water.
5
4
3
1
2