Filter
Top Products
ENWW 8 Selecting and using media 165
Note Tray 1. When using custom-size media, select CUSTOM from the Tray 1 Size menu.
Tray 2 and tray 3. When using custom-size media in these trays, make sure that the
custom/standard switch (see the illustration on page 166) in the tray is set to Custom.
2,000-sheet side input tray (tray 4). This tray does not support custom-size media.
Dimensions of custom-size media must be typed at the control panel. If you are using
tray 1, the Custom menu appears when you select C
USTOM from the Tray 1 Size menu. If
you are using tray 2 or tray 3 the Custom menu appears when you set the custom/
standard switch to Custom and close the tray.
Make sure to type the X dimension and Y dimension of the media. The illustration on
page 166 shows the direction of the X and Y dimensions relative to each of the input trays.
The X dimension is measured from the front of the tray to the back of the tray. The Y
dimension is measured from the left of the tray to the right of the tray.
For more information about setting custom media sizes, see “To load custom media in
tray 2 and tray 3” on page 26.