Filter
Top Products
308 Understanding MFP messages ENWW
THE DIGITAL SENDING
SERVICE AT <IP ADDRESS>
DOES NOT SERVICE THIS
MFP.
CONTACT ADMINISTRATOR.
The MFP is not serviced by the correct
DSS server.
Contact your network administrator.
THE DIGITAL SENDING
SERVICE MUST BE UPGRADED
TO SUPPORT THIS VERSION
OF THE MFP FIRMWARE.
CONTACT ADMINISTRATOR.
The MFP firmware is upgraded. Contact your network administrator.
THE FOLDER YOU HAVE
ENTERED IS NOT A VALID
FOLDER.
An authenticated user has entered a
network folder address.
Verify the folder address or permissions.
THE NUMBER YOU HAVE
ENTERED IS NOT A VALID
SOCIAL SECURITY NUMBER.
PLEASE RE-ENTER THE
NUMBER.
The number that is entered is not valid. Enter the valid social security number.
TOO MANY PAGES IN JOB TO
STAPLE
The finishing device received too many
pages to staple.
No action is necessary.
TOO MANY PAGES IN JOB TO
FINISH
The finishing device received too many
pages to finish the job.
No action is necessary.
TOO MANY PAGES TO BIND Too many pages were sent to bind. No action is necessary.
TOO MANY PAGES TO MAKE
BOOKLET
Too many pages were sent to make a
booklet.
No action is necessary.
TRAY X EMPTY
<TYPE> <SIZE>
The tray is out of media. Load the empty tray (
X) to clear the
message.
If you do not load the specified tray, the
MFP will continue to print from the next
available tray, and the message will
continue to appear.
Note
A prompt to select the size and type of
media appears on the control-panel
display after the media is loaded and the
tray is closed.
TRAY X OPEN The specified tray is open or is not
closed completely.
Close the specified tray.
TRAY XX [TYPE] [SIZE]
TO CHANGE SIZE OR TYPE
TOUCH OK. TO ACCEPT
SETTINGS TOUCH EXIT.
A tray is closed and the configuration
appears on the control-panel display.
Touc h E
XIT to accept the settings or
wait for the message to expire. Touch
O
K to change the size or type.
Message Description or explanation Recommended action