Filter
Top Products
134 Configure device menu ENWW
Printing submenu
Some items in this menu are available from a software program or from the driver (if the
appropriate driver is installed). Driver and program settings override control-panel settings.
For more information, see “Using the printer driver” on page 94.
Note When a value is specified with an ( * ), that value is the factory (default) setting.
Item Values Explanation
COPIES 1 to 32,000 Use this item to set the default number of
copies by specifying any number from 1 to
32,000. Use the numeric keypad to specify
the number of copies.
The factory (default) setting is 1.
DEFAULT PAPER SIZE *LETTER
LETTER ROTATED
LEGAL
EXECUTIVE
STATEMENT
8.5X13
11X17
12X18
A3
A4
A4 ROTATED
A5
RA3
B5(JIS)
B4(JIS)
EXECUTIVE(JIS)
DPOSTCARD(JIS)
8K
16K
ENVELOPE #10
ENVELOPE MONARCH
ENVELOPE C5
ENVELOPE DL
ENVELOPE B5
CUSTOM
Use this item to set the default size for which
media and envelopes to print on if no size is
selected for the print job. (The item name
changes from media to envelope as you
scroll through the available sizes.)
Note
This value is used only if no paper size was
sent with the job.
DEFAULT CUSTOM PAPER
SIZE
UNIT OF MEASURE
X DIMENSION
Y DIMENSION
Use this item to set a custom media size for
any of the installed trays. Substitute the tray
number for <N>. This menu only appears
when the paper-size switch on the selected
tray is in the “custom” position. The user
selects the X and Y dimensions of the custom
media size using the ruler labels in the trays.