Filter
Top Products
358 Printing a paper-path test ENWW
Printing a paper-path test
The paper path test can be used to verify that various paper paths are working properly or
to troubleshoot problems with the tray configuration.
To print a paper-path test
1 Press the MENU button.
2 Scroll to and touch D
IAGNOSTICS.
3 Scroll to and touch S
ET PAPER PATH TEST.
4 Scroll to select the input tray you want to test, the output bin, the duplex printing, and
number of copies, touching O
K after you set the value for each. After selecting the last
option, the paper path test automatically starts.
Setting registration
Use the registration feature to center the image on a page and to align the front and back
images. Because image placement varies slightly for each input tray, the following
alignment procedure might need to be performed for each tray.
The test page prints on A4- or letter-size paper. You can set the registration for any size of
paper by printing on that size and following the instructions on the test page.
To set the registration value
1 Press the MENU button.
2 Scroll to and touch C
ONFIGURE DEVICE.
3 Scroll to and touch P
RINT QUALITY.
4 Scroll to and touch S
ET REGISTRATION.
5 Touch S
OURCE and then and select the tray that you want to adjust (TRAY 1, TRAY 2,
T
RAY 3, or ALL TRAYS).
6 Touch P
RINT TEST PAGE.
7 A page will print from each tray that is selected in step 5. Follow the instructions
printed on the test page(s) to complete the adjustments.