Filter
Top Products
68 Setting dialing and detection options ENWW
Note When fax forwarding is turned on, the overlay header is always appended to the top of the
page, even if the overlay feature is turned on.
To select how the header is printed
1 Press the MENU button.
2 Touch F
AX.
3 Scroll to and touch F
AX SEND.
4 Scroll to and touch O
VERLAY HEADER.
5 Touch Y
ES to print the header as an overlay, or touch NO (default) to append the
header to the top of the page.
Setting dialing mode
The dialing mode setting sets the type of dialing that is used when sending a fax. Specify
either tone (touch-tone phones) or pulse (rotary-dial phones).
To set dialing mode
1 Press the MENU button.
2 Touch F
AX.
3 Scroll to and touch F
AX SEND.
4 Scroll to and touch D
IALING MODE.
5 Touch T
ONE (default) to set the fax for tone dialing, or touch PULSE to set the fax for
pulse dialing.
Setting dialing and detection options
Use the following procedures to set a dialing prefix, redial options, or tone detection.
Setting a dialing prefix
Use the dialing prefix setting to specify a prefix number (such as a “9” to gain access to an
outside line) that is automatically added to all phone numbers when they are dialed.
To set a dialing prefix
Note You might need a pause between the prefix and the phone number. To insert a two second
pause, type a comma (,).
1 Press the M
ENU button.
2 Touch F
AX.
3 Scroll to and touch F
AX SEND.
4 Scroll to and touch D
IAL PREFIX.