Filter
Top Products
192 Advanced settings ENWW
Optimize
CAUTION This section is intended for advanced users only. Setting optimize values incorrectly can
damage the MFP.
Settings in the Optimize menu are applied to all printing, regardless of which media type is
selected. These settings are adjustments based on conditions (such as extremely high
humidity) that might adversely affect all media types. All Optimize values can be set to O
N
or O
FF. By default, all Optimize values are set to OFF.
Table 7. Optimize values
Settings Description When to use
TRANSFER UP 1 Increases the transfer current
one level for better toner
adhesion.
● If all of the media used in the MFP is
rough or poor-quality
● If all of the media used in the MFP
has toner scatter
● If the media is used in a high-
humidity environment (above 80%
relative humidity)
TRANSFER UP 2 Increases the transfer current
two levels for better toner
adhesion.
● If all of the media used in the MFP is
rough or poor-quality
● If all of the media used in the MFP
has toner scatter
● If the media is used in a high-
humidity environment (above 80%
relative humidity)
● If the optimize value TRANSFER UP 1
did not solve the print-quality problem
TRANSFER DOWN 1 Decreases the transfer
current one level for better
toner adhesion.
If the media is used in a low-humidity
environment (less than 10% relative
humidity)
TRANSFER DOWN 2 Decreases the transfer
current two levels for better
toner adhesion.
● If the media is used in a low-humidity
environment (less than 10% relative
humidity)
● If the optimize value
TRANSFER DOWN 1 did not solve the
print-quality problem
LEADING EDGE UP Adjusts how the media is
guided past the image
transfer belt.
If the leading edge of all of the media
used in the MFP has toner scatter
LEADING EDGE DOWN Adjusts how the media is
guided past the image
transfer belt.
If the leading edge of all of the media
used in the MFP has toner missing
HIGH COVERAGE 1 Controls the setting of the
yellow dot pattern that is
designed to eliminate certain
types of banding (47 mm) in
high coverage.
To optimize a number of engine
parameters for all jobs rather than by
media type.