Filter
Top Products
332 Solving MFP problems ENWW
MFP control-panel issues
Situation Solution
The control-panel display is in the
wrong language or shows
unfamiliar characters.
● Reconfigure the control panel to display language.
1 Turn off the MFP.
2 Press the M
ENU button.
3 Touch CONFIGURE DEVICE.
4 Touch S
YSTEM SETUP.
5 Touch LANGUAGE.
6 Touch your language, and then touch
EXIT.
● If the new language does not appear on the display, you
might have touched OK to save your new selection.
The MANUALLY FEED [TYPE]
[SIZE] message cannot be
cleared.
● Touch CONTINUE to clear the message.
● A previous print job might still be in the MFP buffer.
● Make sure that tray 1 has the correct media size loaded.
Control-panel settings, such as
RESOLUTION or ORIENTATION, do
not work or are ignored.
Software-program commands override control-panel settings.
(See “Control panel” on page 4 for information about how your
software program works with control-panel settings.)
The disk is not initialized
(DISK X NOT
INITIALIZED message appears)
Use the Windows-based HP Web Jetadmin or the Macintosh-
based HP LaserJet Utility to initialize the disk.
The disk is write-protected
(DISK X IS
WRITE PROTECTED message
appears)
Fonts and forms cannot be stored on the disk when the disk is
write-protected.
The MFP is paused. Press RESET. The MFP control-panel READY message should
appear and the Ready light should be lit. Resume printing.